How to Change Water Filter in LG Refrigerator

Last Updated on March 4, 2023 by Roy

Changing the water filter in your LG refrigerator is essential to ensure that the water you drink or use for cooking is clean and safe. A water filter should be changed every six months or earlier if you notice a decrease in water flow or a strange taste or odor. In this article, we will guide you through the step-by-step process of changing the water filter in your LG refrigerator.

1Step 1: Locate the Water Filter

2Step 2: Turn off the Water Supply

3Step 3: Remove the Old Water Filter

4Step 4: Install the New Water Filter

5Step 5: Run Water through the New Filter

6Step 6: Reset the Water Filter Indicator

7Conclusion

8See Also:

Step 1: Locate the Water Filter

The first step is to locate the water filter in your LG refrigerator. The location of the water filter may vary depending on the model of your refrigerator. In most LG refrigerators, the water filter is located in the upper right-hand corner of the refrigerator compartment.

Step 2: Turn off the Water Supply

Before you start to change the water filter, you need to turn off the water supply to the refrigerator. Look for the water supply valve behind your refrigerator and turn it off.

Step 3: Remove the Old Water Filter

Once you have located the water filter, you need to remove the old one. Twist the filter counterclockwise to remove it. Be careful not to spill any water that may be left in the filter.

Step 4: Install the New Water Filter

Take your new water filter and remove the protective cover. Align the arrows on the filter with the arrows on the filter housing and insert the filter. Twist the filter clockwise until it locks into place.

Step 5: Run Water through the New Filter

Once you have installed the new water filter, you need to run water through it to remove any air pockets and activate the filter. To do this, turn on the water supply to the refrigerator and dispense water for a few minutes.

Step 6: Reset the Water Filter Indicator

After you have replaced the water filter, you need to reset the water filter indicator. This indicator light will tell you when it is time to change the water filter again. The process for resetting the indicator may vary depending on the model of your refrigerator, so consult your user manual for instructions.

Conclusion

Changing the water filter in your LG refrigerator is a simple process that can be done in just a few minutes. By following the steps outlined in this article, you can ensure that your water is clean and safe to drink. Remember to change your water filter every six months or earlier if you notice a decrease in water flow or a strange taste or odor.